HEAT PUMP EVAPORATORS

Formeco evaporators allow to treat the waste stream separating water from contaminants. The technology is based on boiling the waste water; this water, once distilled, is replaced in the production line, whereas the contaminant, now very concentrated, can be disposed at relatively low cost.
The product to be distilled is sucked into the evaporator exploiting the depression inside the boiler, generated by the vacuum circuit. The cooling cycle, equipped with a heating pump, is able to both heat the liquid in treatment and to cool the vapours produced in the boiling phase. Distilled liquid and the processed residue are unloaded at the end of the distillation process.
.
Strong point of this technology is the low running cost of its application. A drastic reduction in energy consumption can be achieved with double-effect plants (up to 40%) together with a significant increase in the purity of the distillate.

.

PRODUCTS

– HEAT PUMP EVAPORATORS
– WITH EXTERNAL HEATING SOURCE
– WATER CONCENTRATION UNITS

HP – S SERIES

WITH IMMERSED HEATING COILS

For treatment of:

  • Not incrusting liquids
  • oil/water emulsions
  • waste water from die-casting and industrial degreasing
  • From 10 up to 500 litres/hour

HP – R SERIES

WITH INTERNAL BOILER SCRAPER

  • versatile systems for any type of wastewater, especially for encrusting liquids
  • the scraper favours the heat exchange and the concentration of the residue, avoiding the encrustations on the heating surface
  • low energy consumption
  • compact dimensions
  • from 10 to 250 litres / hour

These models are often used as concentration units for bigger evaporation system.

HP – Cf SERIES

WITH FORCED CIRCULATION PUMP

Continuous flow of wastewater into a high efficiency expansion chamber

  • for significant hourly productions
  • waste with density <1,25 Kg / litre and concentration <20% of suspended solids
  • reduced sensitivity to foam formation
  • modular systems with excellent accessibility for maintenance
  • low energy consumption
  • from 50 to 3000 litres / hour 

For a higher concentration of the process residue they can be combined with the evaporation units of the HP-R series or to Formeco Concentration units.

TELE ASSISTANCE

Tele Assistance Online Service allows:

  • Daily control of process parameters (temperature, pressure, flow rate, etc.)
  • Monitoring with timely intervention in case of alarms. The plant manager will be contacted for the maintenances required.
  • Remote changes of parameters and process programs.
  • Remote modifications of the Siemens PLC Management Software.
  • Monthly report of all process parameters with an indication of any deviations and signals of maintenance schedules.
  • The tranquillity of the correct operation of the plant, both for what concerns safety and longevity of your investment.